# # this config file was automatically generated # using lirc-0.8.0(serial) on Fri Feb 10 03:49:29 2006 # # contributed by # # brand: KENWOOD # model no. of remote control: RC-P2030 # devices being controlled by this remote: # begin remote name Kenwood_RC-P2030 bits 16 flags SPACE_ENC eps 30 aeps 100 header 9122 4426 one 662 1592 zero 662 464 ptrail 662 repeat 9119 2157 pre_data_bits 16 pre_data 0x6D92 gap 39886 repeat_gap 96494 toggle_bit 0 begin codes KEY_STOP 0x8877 # Was: stop KEY_REWIND 0x28D7 # Was: rew KEY_FORWARD 0xA857 # Was: fwd KEY_PLAY 0xC837 # Was: play KEY_PREVIOUS 0x6897 # Was: prev KEY_NEXT 0xE817 # Was: next KEY_VOLUMEUP 0x926D # Was: vol_up KEY_VOLUMEDOWN 0x12ED # Was: vol_down time_display 0x18E7 KEY_AGAIN 0x9867 # Was: repeat check 0xD827 KEY_CLEAR 0x58A7 # Was: clear p-mode 0xF807 KEY_1 0x807F # Was: 1 KEY_2 0x40BF # Was: 2 KEY_3 0xC03F # Was: 3 KEY_4 0x20DF # Was: 4 KEY_5 0xA05F # Was: 5 KEY_6 0x609F # Was: 6 KEY_7 0xE01F # Was: 7 KEY_8 0x10EF # Was: 8 KEY_9 0x906F # Was: 9 KEY_0 0x00FF # Was: 0 KEY_0 0x50AF # Was: 10 end codes end remote