# Please make this file available to others # by sending it to # # this config file was automatically generated # using lirc-0.9.0-pre1(default) on Wed Sep 3 23:24:07 2014 # # contributed by Steven Shamlian # # brand: Monoprice # model no. of remote control: Unknown # devices being controlled by this remote: HDX(C)-501E # # Kernel revision: 3.12.26+ # Driver/device option: --driver default --device /dev/lirc0 # Capture device: Vishay TSOP6238 to Raspberry Pi GPIO pin 23 # Kernel modules: lirc_rpi # Type of device controlled: HDMI Switch # Devices controlled: Monoprice HDX(C)-501E # # Remote Layout: # # /---------------------\ # | KEY_POWER | # | | # | KEY_1 KEY_2 KEY_3 | # | KEY_4 KEY_5 | # | | # | KEY_LEFT KEY_RIGHT | # \---------------------/ begin remote name HDX(C)-501E bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9104 4511 one 609 1667 zero 609 527 ptrail 606 repeat 9093 2235 pre_data_bits 16 pre_data 0xFF gap 109640 toggle_bit_mask 0x0 begin codes KEY_POWER 0x00FF KEY_1 0x10EF KEY_2 0x906F KEY_3 0x50AF KEY_4 0x30CF KEY_5 0x708F KEY_RIGHT 0x6897 KEY_LEFT 0x28D7 end codes end remote