# this config file was generated with the help of # xmode2-0.7.0 on 2004-11-11 # # contributed by Adrien Beau # # brand: Philips # model no. of remote control: RC07102/01 # device being controlled by this remote: AS680C sound system, many others # # This remote is sold as part of many Philips sound systems. There # are some variations depending on which features the sound system # offers. For example, this particular remote supports selecting # one of the three available CD slots, when another remote offers # some TV controls instead. Anyway, all codes sent by the keys are # the appropriate standard Philips codes, so you can use your # remote to have basic control over many Philips devices. # # The timings and protocol information were obtained from # http://www.ustr.net/infrared/index.shtml # This helped me ensure that the information below is accurate and # can be used as a basis for other Philips/RC5 remotes. I tuned # the "gap" a little bit so I would get better key repeats. begin remote name Philips-RC07102/01 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 864 864 zero 864 864 plead 864 gap 125000 toggle_bit 2 frequency 37037 # Descriptive Key Name Code Real Function begin codes # These are the "System Select" keys. They change which # mode the AS680C system and the remote are in. Most keys # on the remote emit a different code for each of the four # possible modes. KEY_TUNER 0x000000000000147F # Was: Tuner Tape_1/2 0x00000000000014BF # also Switch Decks KEY_CD 0x000000000000153F # Was: CD KEY_AUX 0x000000000000157F # Was: Aux # These keys always send the same code. These are # Amplifier (Amp) codes. DBB 0x0000000000000406 # Dynamic Bass Boost DSC 0x000000000000040F # Digital Sound Control Inc_Surr 0x0000000000000400 # Incredible Surround KEY_VOLUMEDOWN 0x0000000000001411 # Was: Volume_Down KEY_VOLUMEUP 0x0000000000001410 # Was: Volume_Up # These are the codes sent by the keys in Tuner mode. The # Select_CD_1, Select_CD_2, Select_CD_3, Repeat, Shuffle, # Pause, Play, and Stop keys send no codes in Tuner mode. Tuner_Power 0x000000000000144C # Standby Tuner_Program 0x000000000000047A # Create Preset Tuner_Fast_Backward 0x000000000000145F # Search Previous Tuner_Fast_Forward 0x000000000000145E # Search Next Tuner_Previous_Track 0x0000000000001461 # Previous Preset Tuner_Next_Track 0x0000000000001460 # Next Preset # These are the codes sent by the keys in Tape mode. # The Select_CD_1, Select_CD_2, Select_CD_3, Repeat, # Shuffle, and Program keys send no codes in Tape mode. Tape_Power 0x000000000000148C # Standby Tape_Rewind 0x00000000000014B2 Tape_Pause 0x00000000000014B0 Tape_Fast_Forward 0x00000000000014B4 Tape_Previous_Track 0x00000000000014A1 # Find Previous Track Tape_Next_Track 0x00000000000014A0 # Find Next Track Tape_Play 0x00000000000014B5 Tape_Stop 0x00000000000014B6 # These are the codes sent by the keys in CD mode. CD_Power 0x000000000000150C # Standby CD_Select_CD_1 0x0000000000001537 # (CD_Record) CD_Select_CD_2 0x0000000000001538 # (CD_External1) CD_Select_CD_3 0x0000000000001539 # (CD_External2) CD_Repeat 0x000000000000151D # Continuous Repeat CD_Shuffle 0x000000000000151C CD_Program 0x0000000000001524 CD_Fast_Backward 0x0000000000001532 CD_Pause 0x0000000000001530 CD_Fast_Forward 0x0000000000001534 CD_Previous_Track 0x0000000000001521 CD_Next_Track 0x0000000000001520 CD_Play 0x0000000000001535 CD_Stop 0x0000000000001536 # This is the code sent by the only key in Aux & Phono # mode. The other keys (except the Amp keys, listed above) # do not send any code. Aux_Power 0x000000000000154C # Standby end codes end remote