# # this config file was automatically generated # using lirc-0.7.3pre1(serial) on Sat Nov 5 14:00:00 2005 # contributed by Tobias Buss # # brand: PHILIPS # model no. of remote control: RC331702/01 3139 228 60501 # devices being controlled by this remote: Philips BSure (Beamer) # ############ #NOTE: This lircd.conf is splitted in two pieces, the first is used # for main controls, the second is for cursor and mouse-functions. ############ # PIECE ONE: MAIN-Functions begin remote name BEAMER_main bits 8 flags RCMM|CONST_LENGTH eps 2 aeps 100 header 417 278 three 167 778 two 167 611 one 167 444 zero 167 278 ptrail 167 pre_data_bits 24 pre_data 0x21202A gap 99817 toggle_bit 17 min_repeat 0 begin codes b_power 0x0C b_menu 0x54 b_OK 0x5C b_plus 0x10 b_minus 0x11 b_mute 0x0D b_av_mute 0xFF b_source 0xE8 b_freeze 0x67 b_zoom 0xF6 end codes end remote ############ # PIECE TWO: CURSOR-Functions begin remote name BEAMER_cursor bits 12 flags RCMM|CONST_LENGTH eps 2 aeps 100 header 417 278 three 167 778 two 167 611 one 167 444 zero 167 278 ptrail 167 gap 165000 min_repeat 1 toggle_bit 0 begin codes b_up 0x404 b_down 0x40C b_left 0x408 b_right 0x400 b_mouse_left 0x87F b_mouse_right 0x87E end codes end remote