# # this config file was automatically generated # using lirc-0.6.3pre3 on Tue Mar 20 19:56:53 2001 # # brand: Philips # model: VR510 # supported devices: VCR, TV # contributed by: Thomas Betker # # This remote control came with my Philips VR510 video recorder. It # also supports some TV functions; the TV mode is selected by keeping the # "tv" key pressed (which does not generate a signal by itself). Only # a few keys are available in TV mode, though -- all other keys are dead. # Also, the "mute" key is dead in normal, i.e. VCR, mode. # # Note: The "childlock" key must be pressed for about 5 s before it # generates a signal. # begin remote name Philips/VR510 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 940 836 zero 940 836 plead 988 gap 113742 toggle_bit 2 begin codes KEY_SLEEP 0x000000000000114C # Was: standby childlock 0x000000000000017F monitor 0x000000000000017A KEY_EJECTCD 0x000000000000116D # Was: eject KEY_1 0x0000000000001141 # Was: 1 KEY_2 0x0000000000001142 # Was: 2 KEY_3 0x0000000000001143 # Was: 3 KEY_4 0x0000000000001144 # Was: 4 KEY_5 0x0000000000001145 # Was: 5 KEY_6 0x0000000000001146 # Was: 6 KEY_7 0x0000000000001147 # Was: 7 KEY_8 0x0000000000001148 # Was: 8 KEY_9 0x0000000000001149 # Was: 9 KEY_0 0x0000000000001140 # Was: 0 turbotimer 0x000000000000115C timer 0x000000000000115D KEY_MENU 0x0000000000000152 # Was: menu KEY_OK 0x0000000000000157 # Was: ok KEY_SELECT 0x000000000000114B # Was: select KEY_CLEAR 0x0000000000001171 # Was: clear KEY_UP 0x0000000000000150 # Was: up KEY_DOWN 0x0000000000000151 # Was: down KEY_LEFT 0x0000000000000155 # Was: left KEY_RIGHT 0x0000000000000156 # Was: right KEY_PLAY 0x0000000000001175 # Was: play KEY_REWIND 0x0000000000001165 # Was: backward KEY_FORWARD 0x0000000000001166 # Was: forward KEY_STOP 0x0000000000001176 # Was: stop index 0x0000000000000170 still 0x0000000000001169 KEY_RECORD 0x0000000000001177 # Was: record tv.standby 0x000000000000100C tv.mute 0x000000000000100D tv.program+ 0x0000000000001020 tv.program- 0x0000000000001021 tv.volume- 0x0000000000001011 tv.volume+ 0x0000000000001010 end codes end remote