# this config file was automatically generated # using lirc-0.6.5(serial) on Thu Mar 14 23:43:31 2002 # # contributed by karl@turbobit.com # # brand: Sanyo # model no. of remote control: # devices being controlled by this remote: VCR 9270 (Year 1991?) # # (generated from a generic remote with not all the keys working, # a poor config file...) begin remote name VCR-9270 bits 32 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9093 4326 one 702 1546 zero 702 419 ptrail 719 repeat 9088 2060 gap 107587 toggle_bit 0 begin codes KEY_1 0x000000008C7320DF # Was: 1 KEY_2 0x000000008C73A05F # Was: 2 KEY_3 0x000000008C73609F # Was: 3 KEY_4 0x000000008C73E01F # Was: 4 KEY_5 0x000000008C7330CF # Was: 5 KEY_6 0x000000008C73B04F # Was: 6 KEY_7 0x000000008C73708F # Was: 7 KEY_8 0x000000008C73F00F # Was: 8 KEY_9 0x000000008C7338C7 # Was: 9 KEY_0 0x000000008C73B847 # Was: 0 KEY_REWIND 0x000000008C7348B7 # Was: rew KEY_PLAY 0x000000008C7328D7 # Was: play KEY_FASTFORWARD 0x000000008C73C837 # Was: ff KEY_S 0x000000008C7308F7 # Was: s KEY_R 0x000000008C73A857 # Was: r KEY_PAUSE 0x000000008C738877 # Was: pause KEY_MUTE 0x0000000028D758A7 # Was: mute KEY_POWER 0x000000008C7300FF # Was: power KEY_VOLUMEUP 0x0000000028D79867 # Was: volup KEY_VOLUMEDOWN 0x0000000028D718E7 # Was: voldn end codes end remote