# # this config file is a slightly modified # config file that was automatically generated # using lirc-0.6.6(sir) on Tue Feb 18 19:50:25 2003 # # the problem with the original config file was that # using it lirc usually received two identical signals # after pressing a single button on the remote # # adding the single line # toggle_mask 0x3ff # seems to solve the problem # (I don't understand this line meaning however) # # contributed by Jan Grudo # # brand: SHARP # model no. of remote control: G0927AJ # devices being controlled by this remote: # begin remote name G0927AJ bits 15 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 one 279 1829 zero 279 774 ptrail 279 gap 67790 min_repeat 2 toggle_bit 0 toggle_mask 0x3ff begin codes KEY_POWER 0x00000000000061A2 # Was: power KEY_PLAY 0x0000000000006112 # Was: play KEY_STOP 0x0000000000006392 # Was: stop KEY_VOLUMEUP 0x00000000000040A2 # Was: volup KEY_VOLUMEDOWN 0x00000000000042A2 # Was: voldown forw 0x0000000000006212 KEY_REWIND 0x0000000000006312 # Was: rew KEY_PAUSE 0x0000000000006292 # Was: pause KEY_AGAIN 0x0000000000006022 # Was: repeat KEY_CHANNELUP 0x0000000000006222 # Was: ch_up KEY_CHANNELDOWN 0x0000000000006122 # Was: ch_down KEY_EJECTCD 0x0000000000006332 # Was: eject KEY_MUTE 0x00000000000063A2 # Was: mute KEY_CLEAR 0x0000000000006012 # Was: clear mode_osd 0x00000000000062C6 osp 0x00000000000060E2 prog 0x00000000000062E2 timer 0x0000000000006262 KEY_RECORD 0x0000000000006052 # Was: record f_adv 0x0000000000006092 x2 0x0000000000006232 track_down 0x0000000000006186 track_up 0x0000000000006286 zero_back 0x0000000000006306 KEY_SLOW 0x0000000000006252 # Was: slow dpss_down 0x0000000000006032 dpss_up 0x00000000000063D2 KEY_TIME 0x00000000000060D2 # Was: clock clock_rec 0x00000000000063C2 end codes end remote