# # this config file was automatically generated # using lirc-0.6.3(irman) on Tue Mar 20 23:04:48 2001 # # contributed by: Richard van Paasen # # brand: Sony # model: RMT-V256A # supported devices: tv, vcr # # notes: The remote is equipped with a TV/VCR switch on the side # wich share some keys. The three sections in this conf file define # all keys on the remote, independent of the state of the switch. begin remote name Sony-RMT-V256A bits 15 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0xFFFF post_data_bits 33 post_data 0x0 gap 190000 min_repeat 25 toggle_bit 0 begin codes KEY_EJECTCD 0x00000000000034D0 # Was: eject KEY_CLEAR 0x00000000000063D0 # Was: clear KEY_VOLUMEUP 0x0000000000002480 # Was: vol+ KEY_VOLUMEDOWN 0x0000000000006480 # Was: vol- sp/lp 0x0000000000000DD0 counter/remain 0x00000000000041D0 KEY_SLEEP 0x0000000000000E80 # Was: standby input-select 0x00000000000079D0 KEY_SLOW 0x00000000000062D0 # Was: slow smart-search 0x0000000000001C5D KEY_RECORD 0x0000000000005CD0 # Was: record timer 0x00000000000003D0 KEY_MENU 0x00000000000059D0 # Was: menu KEY_PAUSE 0x000000000000385D # Was: pause KEY_REWIND 0x000000000000045D # Was: rew KEY_PLAY 0x0000000000000C5D # Was: play KEY_FASTFORWARD 0x000000000000445D # Was: ff KEY_STOP 0x000000000000785D # Was: stop end codes end remote begin remote name Sony-RMT-256A-VCR bits 15 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0xFFFF post_data_bits 33 post_data 0x0 gap 190000 min_repeat 25 toggle_bit 0 begin codes tv/video 0x0000000000002AD0 KEY_POWER 0x00000000000054D0 # Was: on/off display 0x0000000000002DD0 audio-monitor 0x00000000000074D0 KEY_CHANNELUP 0x00000000000004D0 # Was: prog+ KEY_CHANNELDOWN 0x00000000000044D0 # Was: prog- end codes end remote begin remote name Sony-RMT-256A-TV bits 15 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0xFFFF post_data_bits 33 post_data 0x0 gap 190000 min_repeat 25 toggle_bit 0 begin codes tv/video 0x0000000000005280 KEY_POWER 0x0000000000005480 # Was: on/off display 0x0000000000002E80 audio-monitor 0x0000000000007480 KEY_CHANNELUP 0x0000000000000480 # Was: prog+ KEY_CHANNELDOWN 0x0000000000004480 # Was: prog- end codes end remote