# # this is a space encoded remote control from Technisat # # contributed by Christoph Bartelmus (columbus@hit.handshake.de) # # brand: Technisat # model: 100 TS 008 # supported devices: satellite receiver ST 3004 S # begin remote name TECHNISAT_ST3004S bits 6 flags SPACE_ENC|CONST_LENGTH eps 20 aeps 120 header 0 0 one 170 7440 zero 170 4920 plead 0 ptrail 170 plead 0 foot 0 0 repeat 0 0 pre_data_bits 5 pre_data 0x11 post_data_bits 0 post_data 0x0 pre 0 0 post 0 0 gap 121400 repeat_bit 2 begin codes KEY_POWER 0x0000000000000001 # Was: POWER KEY_MUTE 0x0000000000000006 # Was: MUTE KEY_0 0x000000000000000F # Was: 0 KEY_1 0x0000000000000010 # Was: 1 KEY_2 0x0000000000000011 # Was: 2 KEY_3 0x0000000000000012 # Was: 3 KEY_4 0x0000000000000013 # Was: 4 KEY_5 0x0000000000000014 # Was: 5 KEY_6 0x0000000000000015 # Was: 6 KEY_7 0x0000000000000016 # Was: 7 KEY_8 0x0000000000000017 # Was: 8 KEY_9 0x0000000000000018 # Was: 9 KEY_VOLUMEUP 0x000000000000002E # Was: VOL_UP KEY_VOLUMEDOWN 0x000000000000002F # Was: VOL_DOWN KEY_CHANNELUP 0x0000000000000007 # Was: CH_UP KEY_CHANNELDOWN 0x0000000000000008 # Was: CH_DOWN KEY_LIST 0x0000000000000037 # Was: LIST A/B 0x0000000000000024 TV/R 0x0000000000000002 KEY_BACK 0x0000000000000027 # Was: BACK KEY_MENU 0x000000000000002B # Was: MENU KEY_OK 0x0000000000000036 # Was: OK ARROW_UP 0x0000000000000032 ARROW_DOWN 0x0000000000000033 ARROW_RIGHT 0x0000000000000035 ARROW_LEFT 0x0000000000000034 end codes end remote