irtext2udp

Section: User Commands (1)

Updated: Last change: Oct 2016

NAME

irtext2udp - Convert pulse/space text data to binary UDP driver format

SYNOPSIS

irtext2udp [-r resolution] [file]

DESCRIPTION

irtext2udp is a filter converting pulse/space printable data such as generated by mode2(1) to the binary format used by the LIRC udp driver.

The file argument is a textfile with pulse/space data. If not given, standard input is used. Lines not starting with space or pulse are silently ignored.

The normal usage pattern is to combine irtext2udp with standard tools such as socat(1) to send the binary data to a lircd instance using the udp driver.

OPTIONS

-r, --resolution <resolution>: Udp packages are measured in ticks. The length of each tick is defined by the resolution. The default value is 61, computed as 1000000/16384 and corresponding to 1/16384 seconds. This is derived from old designs using a 32 kHz clock.
-v , --version: Print version and exit.
-h , --help: Print help message.

EXAMPLES

Using socat(1) to send data to a lircd instance using the udp driver listening on the default udp port 8765 on localhost:


    irtext2udp < input-file | nc --udp localhost 8765

    irtext2udp < input-file | socat STDIN UDP:localhost:8765

This document was created by man2html, using the manual pages.
Time: 02:14:59 GMT, June 23, 2017