ir_remote_types.h File Reference

(88b69b3 2017-04-04 15:17:08 +0200)

Describes and decodes the signals from IR remotes. More...

#include <stdint.h>
#include <sys/time.h>
#include <unistd.h>
#include <string.h>
#include <math.h>
#include <stdlib.h>
#include "media/lirc.h"

Go to the source code of this file.

Classes
struct	ir_code_node
	An ir_code for entering into (singly) linked lists, i.e. More...
struct	ir_ncode
	IR Command, corresponding to one (command defining) line of the configuration file. More...
struct	decode_ctx_t
	State describing code, pre, post + gap and repeat state. More...
struct	ir_remote
	One remote as represented in the configuration file. More...

Macros
#define	IR_PROTOCOL_MASK   0x07ff
#define	RAW_CODES   0x0001
	for internal use only
#define	RC5   0x0002
	IR data follows RC5 protocol.
#define	SHIFT_ENC   RC5
	IR data is shift encoded (name obsolete)
#define	RC6   0x0004
	IR data follows RC6 protocol.
#define	RCMM   0x0008
	IR data follows RC-MM protocol.
#define	SPACE_ENC   0x0010
	IR data is space encoded.
#define	SPACE_FIRST   0x0020
	bits are encoded as space+pulse
#define	GOLDSTAR   0x0040
	encoding found on Goldstar remote
#define	GRUNDIG   0x0080
	encoding found on Grundig remote
#define	BO   0x0100
	encoding found on Bang & Olufsen remote
#define	SERIAL   0x0200
	serial protocol
#define	XMP   0x0400
	XMP protocol.
#define	REVERSE   0x0800
#define	NO_HEAD_REP   0x1000
	no header for key repeats
#define	NO_FOOT_REP   0x2000
	no foot for key repeats
#define	CONST_LENGTH   0x4000
	signal length+gap is always constant
#define	REPEAT_HEADER   0x8000
	header is also sent before repeat code
#define	COMPAT_REVERSE   0x00010000
	compatibility mode for REVERSE flag
#define	REPEAT_MAX_DEFAULT   600
	stop repeating after 600 signals (approx. More...
#define	DEFAULT_FREQ   38000
#define	IR_PARITY_NONE   0
#define	IR_PARITY_EVEN   1
#define	IR_PARITY_ODD   2

Typedefs
typedef uint64_t	ir_code
	Denotes an internal coded representation for an IR transmission. More...

Detailed Description

Describes and decodes the signals from IR remotes.

Definition in file ir_remote_types.h.

Macro Definition Documentation

#define REPEAT_MAX_DEFAULT   600

stop repeating after 600 signals (approx.

1 minute) update technical.html when changing this value

Definition at line 133 of file ir_remote_types.h.

Typedef Documentation

typedef uint64_t ir_code

Denotes an internal coded representation for an IR transmission.

Note that there may be more than one ir_code in one ir_ncode.

Definition at line 47 of file ir_remote_types.h.